Are you tired of sifting through countless heat shrink tube options? Understanding the top manufacturers can save you time and money. By knowing the best factories, you ensure quality and reliability in your projects. Dive in to discover the leading names in the industry and make informed choices today!
Top 10 Heat Shrink Tube Manufacturers In The World
Product Details: Heat shrink tubing products from various manufacturers offering electrical insulation, protection, and strain relief.
Technical Parameters:
– Material: Polyolefin, PTFE, FEP, PFA
– Certification: ISO 9001
Application Scenarios:
– Automotive engine compartments
– Outdoor cable protection
Pros:
– Good electrical insulation
– High durability and resistance to environmental factors
Cons:
– Higher cost for premium products
– Limited options for budget-friendly solutions
52 Heat Shrinkable Tubing Manufacturers in 2025 – Metoree
Product Details: Heat shrinkable tubing is a molded resin tube that shrinks when heat is applied, primarily used to protect and insulate electric wires.
Technical Parameters:
– Shrinkage ratio: approximately 2:1 to 3:1
– Materials: polyethylene, elastomers, rubber-based, fluoroplastic-based, silicone…
Application Scenarios:
– Internal wiring used in home appliances
– Wiring harnesses for automobiles
Pros:
– Provides insulation and protection against moisture and corrosion
– Easy to use with heat application
Cons:
– Requires careful handling to avoid burns
– Not suitable for electrolytic capacitors and secondary batteries
Heat Shrink and Non-Shrink Tubing Producer | KTG
Product Details: Heat shrink and non-shrink tubing for automotive, electronic, and communication industries.
Technical Parameters:
– Dual Wall Heat Shrink Tubing
– Single Wall Heat Shrink Tubing
Application Scenarios:
– Automotive wiring and insulation
– Electronic component protection
Pros:
– High-quality materials and manufacturing
– Wide variety of products available
Cons:
– Potential for limited availability in some regions
– Specific product requirements may vary
Heat Shrink Tubing & Heat Shrink Machines | DSG-Canusa
Product Details: Heat Shrink Tubing and Cold Shrink Products for Automotive, Industrial and Infrastructure.
Technical Parameters:
– Thin-, medium- and heavy wall heat shrink tubing
– Materials: polyolefin, fluoropolymer, elastomer with or without adhesive
Application Scenarios:
– Sealing, marking and protecting wire harnesses, cables, pipes and tubes
– Electrical insulation, sealing, cathodic & corrosion protection
Pros:
– High-quality materials and products
– Wide range of solutions for various applications
Cons:
– Limited information on specific product dimensions
– Potentially higher cost compared to generic alternatives
Heat Shrink Products – Heat Shrink Manufacturer – Pexco
Product Details: Heat shrink products from Pexco.
Technical Parameters:
– Temperature range: -55°C to 125°C
– Material: Polyolefin
Application Scenarios:
– Electrical insulation
– Cable bundling
Pros:
– Durable and flexible
– Easy to apply
Cons:
– Requires heat source for application
– Limited color options
Heat Shrink Tubing | KTG Electronics
Product Details: Heat shrink tubing and non-heat shrink tubing manufactured by Changyuan Electronics (Dongguan) Co., Ltd., established in 1993.
Technical Parameters:
– Various shrink ratios (2:1, 3:1, 4:1, 6:1)
– Materials include PTFE, PVC, Polyethylene, fiberglass, silicone rubber
Application Scenarios:
– Automotive wiring and insulation
– Home appliance wiring and protection
Pros:
– Wide range of products for different applications
– Manufactured under ISO 9001 and IATF 16949 certifications
Cons:
– Limited information on specific product performance
– Potentially higher costs for custom products
Heat Shrinkable Tubing Manufacturer | About WOER
Product Details: Heat shrink tubing and non-heat shrink tubing products for various applications.
Technical Parameters:
– Diameters ranging from 3/64″ to 4″
– Shrink ratios of 2:1, 3:1, 4:1
Application Scenarios:
– Electrical insulation in automotive and electronics
– Medical devices and drug delivery systems
Pros:
– Made from premium quality raw materials
– Wide range of products for different industries
Cons:
– Limited information on specific product performance
– Potentially higher cost compared to generic alternatives
Grayline Inc | Custom Heat Shrink & Polymer Tubing Manufacturing
Product Details: Specialty flexible tubing with customization options including tube cutting and custom coloring.
Technical Parameters:
– Size combinations from .02″ ID to 1.6″
– Available in various materials and colors
Application Scenarios:
– Automotive industry
– Medical devices
Pros:
– Exceptional customer service
– High-quality, reliable products
Cons:
– Limited information on specific material properties
– Potential lead time for custom solutions
Heat Shrink & Extruded PTFE, PFA, FEP Tubing & FEP Roll Covers
Product Details: Heat Shrink & Extruded PTFE, PFA, FEP Tubing & FEP Roll Covers
Technical Parameters:
– Temperature range: -275°F to 500°F
– FDA and USP Class VI approved resins
Application Scenarios:
– Aerospace industry
– Medical and pharmaceutical applications
Pros:
– High chemical resistance
– Custom fabrication available
Cons:
– Not certified to Mil Specifications 23053/11 and 23053/12
– Limited to specific temperature ranges
Heat Shrink Tubing | PTFE, PEEK, FEP & More | Zeus
Product Details: Heat shrinkable tubing available in various sizes, dimensions, and shrink ratios, made from high-performance polymer resins including PTFE, FEP, PFA, ETFE, and PEEK.
Technical Parameters:
– Temperature resistance up to 500 °F (260 °C) for PEEKshrink™
– Moisture proof bond over wires and cables
Application Scenarios:
– Medical applications such as catheter design
– General industrial applications including aerospace and automotive
Pros:
– Provides a tight, protective covering
– Enhances reliability and performance of covered components
Cons:
– May require specific heat application techniques
– Limited to specific temperature and environmental conditions
Related Video
Comparison Table
| Company | Product Details | Pros | Cons | Website |
|---|---|---|---|---|
| Top 10 Heat Shrink Tube Manufacturers In The World | Heat shrink tubing products from various manufacturers offering electrical insulation, protection, and strain relief. | – Good electrical insulation – High durability and resistance to environmental factors | – Higher cost for premium products – Limited options for budget-friendly solutions | manufacturer.best |
| 52 Heat Shrinkable Tubing Manufacturers in 2025 – Metoree | Heat shrinkable tubing is a molded resin tube that shrinks when heat is applied, primarily used to protect and insulate electric wires. | – Provides insulation and protection against moisture and corrosion – Easy to use with heat application | – Requires careful handling to avoid burns – Not suitable for electrolytic capacitors and secondary batteries | us.metoree.com |
| Heat Shrink and Non-Shrink Tubing Producer | KTG | Heat shrink and non-shrink tubing for automotive, electronic, and communication industries. | – High-quality materials and manufacturing – Wide variety of products available | – Potential for limited availability in some regions – Specific product requirements may vary |
| Heat Shrink Tubing & Heat Shrink Machines | DSG-Canusa | Heat Shrink Tubing and Cold Shrink Products for Automotive, Industrial and Infrastructure. | – High-quality materials and products – Wide range of solutions for various applications | – Limited information on specific product dimensions – Potentially higher cost compared to generic alternatives |
| Heat Shrink Products – Heat Shrink Manufacturer – Pexco | Heat shrink products from Pexco. | – Durable and flexible – Easy to apply | – Requires heat source for application – Limited color options | www.pexco.com |
| Heat Shrink Tubing | KTG Electronics | Heat shrink tubing and non-heat shrink tubing manufactured by Changyuan Electronics (Dongguan) Co., Ltd., established in 1993. | – Wide range of products for different applications – Manufactured under ISO 9001 and IATF 16949 certifications | – Limited information on specific product performance – Potentially higher costs for custom products |
| Heat Shrinkable Tubing Manufacturer | About WOER | Heat shrink tubing and non-heat shrink tubing products for various applications. | – Made from premium quality raw materials – Wide range of products for different industries | – Limited information on specific product performance – Potentially higher cost compared to generic alternatives |
| Grayline Inc | Custom Heat Shrink & Polymer Tubing Manufacturing | Specialty flexible tubing with customization options including tube cutting and custom coloring. | – Exceptional customer service – High-quality, reliable products | – Limited information on specific material properties – Potential lead time for custom solutions |
| Heat Shrink & Extruded PTFE, PFA, FEP Tubing & FEP Roll Covers | Heat Shrink & Extruded PTFE, PFA, FEP Tubing & FEP Roll Covers | – High chemical resistance – Custom fabrication available | – Not certified to Mil Specifications 23053/11 and 23053/12 – Limited to specific temperature ranges | tefcap.com |
| Heat Shrink Tubing | PTFE, PEEK, FEP & More | Zeus | Heat shrinkable tubing available in various sizes, dimensions, and shrink ratios, made from high-performance polymer resins including PTFE, FEP, PFA,… | – Provides a tight, protective covering – Enhances reliability and performance of covered components |
Frequently Asked Questions (FAQs)
What are heat shrink tubes used for?
Heat shrink tubes are commonly used for insulating and protecting electrical connections, providing strain relief, and preventing moisture ingress. They shrink when heated, creating a tight seal around wires and components, which enhances durability and safety in various applications.
How do I choose the right size of heat shrink tube?
To choose the right size, measure the diameter of the wire or component you want to cover. Select a heat shrink tube that has a diameter slightly larger than your measurement. Remember, the tube will shrink to fit snugly when heated.
Are there different materials for heat shrink tubes?
Yes, heat shrink tubes come in various materials, including polyolefin, PVC, and fluoropolymer. Each material has unique properties, such as temperature resistance and flexibility, making it suitable for different applications. Consider your specific needs when selecting a material.
Can heat shrink tubes be used outdoors?
Absolutely! Many heat shrink tubes are designed for outdoor use and are resistant to UV rays, moisture, and extreme temperatures. Look for tubes specifically labeled as outdoor or weather-resistant to ensure they can withstand environmental conditions.
How do I apply heat shrink tubes correctly?
To apply heat shrink tubes, slide the tube over the wire or component, ensuring it covers the area you want to protect. Use a heat gun or lighter to evenly apply heat until the tube shrinks tightly around the surface. Be careful not to overheat, as this can damage the tube or underlying components.