Are you tired of steam traps that just don’t perform? Discovering the best inverted bucket steam trap suppliers can save you time and money. By comparing top factories, you’ll find reliable options that enhance efficiency. Dive in to uncover the best choices for your needs and make informed decisions today!
Inverted Bucket | Steam Traps – Watson McDaniel
Product Details: Inverted Bucket Traps use an inverted bucket as a float device to control the opening and closing of the plug and seat to discharge condensate. Body materials available are Cast Iron and Stainless for pressures up to 450 psig.
Technical Parameters:
– Body Materials: Cast Iron, Stainless Steel
– Pressure Rating: Up to 450 psig
Application Scenarios:
– Drip applications in steam mains and steam supply lines
– Process applications where air venting is not critical
Pros:
– Rugged and simple design with a long service life
– Top-mounted discharge orifice less susceptible to clogging
Cons:
– Poor air-handling capacity
– Must maintain a water prime to function properly
Inverted Bucket Steam Trap – 800 Series – Armstrong International
Product Details: Inverted Bucket Steam Trap – 800 Series, designed for efficient condensate drainage in steam-using equipment, made of cast iron for horizontal installation.
Technical Parameters:
– Model: 800, Maximum Capacity: 700 lb/hr (318 kg/hr), Maximum Allowable Pressure:…
– Model: 816, Maximum Capacity: 20,000 lb/hr (9,072 kg/hr), Maximum Allowable Pres…
Application Scenarios:
– Used in various steam-using equipment for efficient condensate drainage.
– Applicable in industries such as hydrocarbon processing, food and beverage, phar…
Pros:
– Efficient condensate drainage with minimal maintenance.
– Repairable design for cost savings and longevity.
Cons:
– Potential for wear and friction in mechanisms over time.
– Requires proper installation to avoid issues with dirt accumulation.
Inverted Bucket Steam Traps | US – Spirax Sarco
Product Details: Inverted Bucket Steam Trap available in sizes ranging from 1/2″ – 3″. Robust design able to resist waterhammer and can be used with superheated steam.
Technical Parameters:
– Sizes: 1/2″ – 3″
– Robust design with check valve for superheated steam
Application Scenarios:
– Steam systems requiring reliable drainage
– Applications in industries such as food and beverage, pharmaceuticals, and hospi…
Pros:
– Most robust type of mechanical traps
– Wide selection of valve orifices for precise pressure and load matching
Cons:
– May require regular maintenance
– Initial installation cost may be higher compared to simpler traps
Inverted Bucket Steam Traps for Heating & Cooling Applications
Product Details: Armstrong 1822 Inverted Bucket Trap with a 1/2″ NPT connection, 1315 PPH capacity, and in-line horizontal configuration for service up to 300 psi.
Technical Parameters:
– Connection Size: 1/2″ NPT
– Capacity: 1315 PPH
– Max Pressure: 300 psi
Application Scenarios:
– Tracer lines
– Heating and processing applications
Pros:
– Freeze-resistant, all-stainless steel construction
– Excellent purging action and continuous air venting
Cons:
– Ships within 2 weeks
– List price may be high for some customers
Armstrong – 880 Series Inverted Bucket | Steam Traps & Parts – State Supply
Armstrong 880 Series Inverted Bucket Trap – Boilersupplies.com
Product Details: Armstrong 880 Series Inverted Bucket Trap
Technical Parameters:
– Not specified
– Not specified
Application Scenarios:
– Steam and hot water systems
– Condensate return systems
Pros:
– Reliable performance
– Durable construction
Cons:
– Not manufactured by Patterson-Kelley
– Subject to price changes due to metal costs
Inverted Bucket Traps Suppliers – Thomasnet
Product Details: Inverted bucket steam traps made from various materials including cast iron, stainless steel, and alloy steel. Available in multiple sizes and pressure ratings.
Technical Parameters:
– Sizes: 1/2 in. to 2-1/2 in.
– Operating pressure: up to 900 psig
Application Scenarios:
– Used in steam lines and process equipment.
– Applicable in heating, tracing, dripleg, and high-pressure services.
Pros:
– Corrosion-resistant materials available.
– Wide range of sizes and pressure ratings.
Cons:
– Potential for water hammer issues.
– Maintenance may be required for optimal performance.
Inverted Bucket Steam Traps – Emerson US
Product Details: Yarway inverted bucket steam traps are general-purpose traps suitable for a wide variety of loads and applications.
Technical Parameters:
– Simple construction
– Rugged design
Application Scenarios:
– General-purpose steam applications
– Condensate removal
Pros:
– Simple construction
– Reliable operation
Cons:
– Marginal air handling during startup
– Not self-draining; subject to freeze-ups
Inverted Bucket Steam Trap – Lonze Valve
Product Details: LONZ inverted bucket steam trap, a mechanical steam trap made of stainless steel with heat-treated steel seat, designed for low, medium, and high pressure applications.
Technical Parameters:
– Maximum gas consumption multiplied by rates (2-3 times)
– Maximum differential pressure, maximum working temperature, working conditions,…
Application Scenarios:
– Condensation water recovery systems
– Steam saving capacity and high heat engine efficiency
Pros:
– Outstanding performance under various pressure conditions
– Long life cycle and resistance to abrasion and corrosion
Cons:
– Requires careful installation to ensure proper functioning
– Potential for mechanical failure if not maintained
Series B1 | Hoffman Specialty Inverted Bucket Steam Traps – State Supply
Product Details: Hoffman Specialty Inverted Bucket Steam Trap, Series B1
Technical Parameters:
– Material: Cast Iron
– Maximum Operating Pressure: 15 psi to 250 psi
Application Scenarios:
– Used in steam systems for efficient condensate removal
– Suitable for various industrial applications
Pros:
– Durable construction with cast iron material
– Wide range of pressure ratings available
Cons:
– May require regular maintenance
– Performance can be affected by system conditions
Related Video
Comparison Table
| Company | Product Details | Pros | Cons | Website |
|---|---|---|---|---|
| Inverted Bucket | Steam Traps – Watson McDaniel | Inverted Bucket Traps use an inverted bucket as a float device to control the opening and closing of the plug and seat to discharge condensate. Body m… | – Rugged and simple design with a long service life – Top-mounted discharge orifice less susceptible to clogging | – Poor air-handling capacity – Must maintain a water prime to function properly |
| Inverted Bucket Steam Trap – 800 Series – Armstrong International | Inverted Bucket Steam Trap – 800 Series, designed for efficient condensate drainage in steam-using equipment, made of cast iron for horizontal install… | – Efficient condensate drainage with minimal maintenance. – Repairable design for cost savings and longevity. | – Potential for wear and friction in mechanisms over time. – Requires proper installation to avoid issues with dirt accumulation. | armstronginternational.com |
| Inverted Bucket Steam Traps | US – Spirax Sarco | Inverted Bucket Steam Trap available in sizes ranging from 1/2″ – 3″. Robust design able to resist waterhammer and can be used with superheated steam. | – Most robust type of mechanical traps – Wide selection of valve orifices for precise pressure and load matching | – May require regular maintenance – Initial installation cost may be higher compared to simpler traps |
| Inverted Bucket Steam Traps for Heating & Cooling Applications | Armstrong 1822 Inverted Bucket Trap with a 1/2″ NPT connection, 1315 PPH capacity, and in-line horizontal configuration for service up to 300 psi. | – Freeze-resistant, all-stainless steel construction – Excellent purging action and continuous air venting | – Ships within 2 weeks – List price may be high for some customers | www.statesupply.com |
| Armstrong – 880 Series Inverted Bucket | Steam Traps & Parts – State Supply | |||
| Armstrong 880 Series Inverted Bucket Trap – Boilersupplies.com | Armstrong 880 Series Inverted Bucket Trap | – Reliable performance – Durable construction | – Not manufactured by Patterson-Kelley – Subject to price changes due to metal costs | www.boilersupplies.com |
| Inverted Bucket Traps Suppliers – Thomasnet | Inverted bucket steam traps made from various materials including cast iron, stainless steel, and alloy steel. Available in multiple sizes and pressur… | – Corrosion-resistant materials available. – Wide range of sizes and pressure ratings. | – Potential for water hammer issues. – Maintenance may be required for optimal performance. | www.thomasnet.com |
| Inverted Bucket Steam Traps – Emerson US | Yarway inverted bucket steam traps are general-purpose traps suitable for a wide variety of loads and applications. | – Simple construction – Reliable operation | – Marginal air handling during startup – Not self-draining; subject to freeze-ups | www.emerson.com |
| Inverted Bucket Steam Trap – Lonze Valve | LONZ inverted bucket steam trap, a mechanical steam trap made of stainless steel with heat-treated steel seat, designed for low, medium, and high pres… | – Outstanding performance under various pressure conditions – Long life cycle and resistance to abrasion and corrosion | – Requires careful installation to ensure proper functioning – Potential for mechanical failure if not maintained | www.lonzevalve.com |
| Series B1 | Hoffman Specialty Inverted Bucket Steam Traps – State Supply | Hoffman Specialty Inverted Bucket Steam Trap, Series B1 | – Durable construction with cast iron material – Wide range of pressure ratings available | – May require regular maintenance – Performance can be affected by system conditions |
Frequently Asked Questions (FAQs)
What is an inverted bucket steam trap and how does it work?
An inverted bucket steam trap is a device used to remove condensate and air from steam systems while preventing steam loss. It operates by using a buoyant bucket that rises and falls with the water level. When steam enters, it pushes the bucket up, sealing the outlet. As condensate accumulates, the bucket sinks, allowing water to escape, ensuring efficient steam usage.
Why should I choose a specific supplier for inverted bucket steam traps?
Choosing a reliable supplier ensures you receive high-quality products that meet industry standards. A good supplier offers expertise, support, and a range of options tailored to your needs, helping you maintain efficient operations and reduce downtime.
What materials are commonly used in manufacturing inverted bucket steam traps?
Inverted bucket steam traps are typically made from durable materials like cast iron, stainless steel, or bronze. These materials are chosen for their resistance to corrosion and high temperatures, ensuring longevity and reliable performance in demanding steam applications.
How do I maintain my inverted bucket steam trap?
Regular maintenance involves checking for leaks, ensuring proper operation, and cleaning the trap to prevent blockages. It’s also important to inspect the trap periodically for wear and tear, replacing any worn components to maintain efficiency and prevent failures.
What are the common applications for inverted bucket steam traps?
Inverted bucket steam traps are widely used in various industries, including food processing, pharmaceuticals, and power generation. They are ideal for applications where steam is used for heating, sterilization, or energy generation, ensuring efficient condensate removal and steam conservation.