Are you curious about which spun filter manufacturers stand out in quality and reliability? Comparing the top factories is essential for making informed choices that can enhance your operations. Discovering the best options can save you time and money. Dive in to find out which manufacturers lead the pack!
Spun Filter Cartridge Manufacturer and Supplier – Filson Filter
Product Details: Filson spun filter cartridge, also known as pp spun filter cartridge, is a depth-filter cartridge made from 100% high purity polypropylene filter media, designed for long on-stream life and broad chemical compatibility.
Technical Parameters:
– Filter Fineness: 0.5 – 120 µm
– Length: 5”– 70”
– Connections: DOE and O-ring adapter
– Outer Diameter: 60/62/64 mm
– Inner Diameter: 27/28/29 mm
– Fiber Material: Polypropylene/Polyester/Nylon
– End Caps: Polypropylene/Nylon
– Temperature Resistance: 80°C
– Differential Pressure: 4.0 bar/25°C
Application Scenarios:
– Potable Water Filtration
– Food and Beverages
– DI Water Filtration
– Plating Solution Filtration
– R.O. Pre-filtration
– Membrane Pre-filtration
– Organic Solvent Filtration
– Chemical Processing
– Photographic Filtration
– Paper coatings
Pros:
– 100% polypropylene filtration media for superior purity
– Long service life, cost-effective filtration
– No adhesives, lubricants or antistatic agents used
– Fewer filter change-outs to decrease labor and filter disposal costs
Cons:
– Limited surface area compared to pleated filters
– Not as wide chemical compatibility or operating temperature as some alternatives
Melt Blown Filter Cartridges | PP Spun Filter – Polypropylene
Product Details: Melt Blown Filter Cartridges or PP Spun Filters are designed for higher efficiency and improved filtration. NSF-certified PP spun filter cartridges are reliable, efficient, and customizable.
Technical Parameters:
– Raw Material: Virgin Polypropylene
– Length: 5”-70”
Application Scenarios:
– Water and wastewater filtration
– Pre-Filtration for Reverse Osmosis
Pros:
– Good dirt holding capacity
– Economical and efficient
Cons:
– Replacement frequency depends on impurities
– Limited to specific operating conditions
Spun Cartridge Filter – 3R Filters (RAFEEQ FILTRATION SYSTEMS
Product Details: Spun Cartridge Filter / PP melt blown cartridge filter, made of PP meltblown material, designed for high filtration efficiency.
Technical Parameters:
– Micron Rating: 1, 5, 10, 20, 50, 100, 200 Micron
– Max. operating temperature: 60°C
Application Scenarios:
– Fine Chemicals and Pharmaceuticals: D.I. Water, R.O. Pre filtration, Biological…
– Beverages: Wine, Alcohols, Fruit Juice, Beer
Pros:
– Wide chemical compatibility
– High chlorine taste and odor reduction
Cons:
– Limited to specific micron ratings
– Temperature limitation of 60°C
PP Spun Filters – mmpfilter.com
Product Details: PP Spun filters manufactured by mmp are widely used as pre filter of final filter for industrial applications. They are available in a complete range of micron ratings from 0.5 to 120 and lengths from 5″ to 70″.
Technical Parameters:
– Raw Material: Virgin Polypropylene
– Length: 5″-70″
– Microns: 1-100µ
– Max Temperature: 60° C
– Flow: 1m³ per hour per 10” at pressure of 2.5Kg/cm²
Application Scenarios:
– Water Treatment
– Chemical Processing
– Pharmaceutical Industry
– Food and Beverage Industry
– Oil Industry
Pros:
– 100% pure polypropylene filter media
– Excellent particle retention with broad chemical compatibility
– Long service life and cost-effective
– High dirt-holding capacity
Cons:
– Limited to specific temperature and pressure ratings
– May require regular maintenance and replacement
Spun Bonded Filter Cartridges Manufacturer, PP Spun Filter Cartridge
Product Details: Spun Bonded Filter Cartridges manufactured by Ami Enterprises, made of polypropylene construction for depth filtration.
Technical Parameters:
– True density gradient
– Graded density construction
Application Scenarios:
– Water filtration
– Industrial applications
Pros:
– High dirt-holding capacity
– Excellent after-sale support
Cons:
– Limited to polypropylene applications
– Potential for clogging with larger particles
Spun Bonded Filter Cartridges Manufacturer & Supplier | Industrial Filters
Product Details: Spun Bonded Filter Cartridges are made up of 100% polypropylene fibers, available with core and without core versions, designed for high efficiency and dirt retention.
Technical Parameters:
– Sizes: 10”, 20”, 30”, 40”, 50”, 60” Long
– Micron Rating: 1, 5, 10, 25, 50, 75, 100
Application Scenarios:
– Food & Beverages: Bottled water, Flavors, Polishing Lines
– Pharmaceuticals: Base product clarifications, Membrane prefilter
Pros:
– Free of surfactants, binders, and adhesives.
– Excellent flow with low pressure drop.
Cons:
– Limited to polypropylene material compatibility.
– Not suitable for all chemical environments.
Spun Polypropylene Sediment Filter Cartridges – Pure Aqua, Inc
Product Details: Spun Polypropylene Sediment Filter Cartridges are constructed of multi-layers for superior depth filtration, capturing particles throughout the entire cross section and reducing surface binding. They meet NSF standards and are available in various micron ratings and sizes.
Technical Parameters:
– Material: Polypropylene
– Length: 9-7/8” – 40”
– Maximum temperature: 60°C / 140°F
– Micron rating (nominal): 1 – 50
– Maximum flow rate: 2 – 28 gpm (2.5” diameter), 10 – 30 gpm (4.5” diameter)
Application Scenarios:
– Reverse osmosis pre-filtration
– Food & beverage industry
– Potable water
– Electronics
– Residential
– Fine chemicals
– Plating
– Metal finishing
– Car Wash
Pros:
– Multi-layers graded density
– Excellent chemical resistance
– Low cost
– High dirt holding capacity
– Wide range of micron ratings
– Wide range of sizes
Cons:
– Limited maximum temperature of 60°C / 140°F
– Potential for reduced efficiency over time
Rattan Filters | Spun bonded filter cartridge
Product Details: Spun Bonded / Melt- Blown Filter Cartridge made of 100% polypropylene fibers, available with core and without core version.
Technical Parameters:
– Sizes: 10”, 20”, 30”, 40” Long
– Micron Rating: 0.5, 1, 5, 10, 25, 50, 75, 100
Application Scenarios:
– Pharmaceuticals: base product clarifications, membrane pre filter
– Food & beverages: bottled water, flavors, polishing lines
Pros:
– 100% Polypropylene for wide chemical compatibility
– High dirt holding capacity
Cons:
– No media migration
– Limited to specific sizes and micron ratings
Spun / Melt Blown Filter Cartridges Manufacturers & Suppliers – Indian …
Product Details: Spun/Melt Blown Filter Cartridges are prepared of 100% polypropylene fibers with a proper gradient density from the outer to the inner surface. Available in core and without core versions, suitable for various applications.
Technical Parameters:
– Media: Polypropylene
– Removal Ratings: 1, 2, 3, 5, 10, 25, 50, 75, 100 µm
Application Scenarios:
– Industrial applications
– Chemical-pharmaceutical applications
Pros:
– High structural integrity under harsh conditions
– No media migration
Cons:
– Limited maximum operating temperature: 60°C
– Potential for differential pressure change out at 35psig
RO Protect Extreme – meltblown spun filter cartridges manufacturer …
Product Details: RO Protect Extreme is a high-performance reverse osmosis system designed for optimal water purification.
Technical Parameters:
– Flow Rate: 50 GPD
– Membrane Type: Thin Film Composite
Application Scenarios:
– Residential water purification
– Commercial water treatment
Pros:
– High efficiency in removing contaminants
– Compact design for easy installation
Cons:
– Requires regular maintenance
– Initial setup cost may be high
Related Video
Comparison Table
| Company | Product Details | Pros | Cons | Website |
|---|---|---|---|---|
| Spun Filter Cartridge Manufacturer and Supplier – Filson Filter | Filson spun filter cartridge, also known as pp spun filter cartridge, is a depth-filter cartridge made from 100% high purity polypropylene filter medi… | – 100% polypropylene filtration media for superior purity – Long service life, cost-effective filtration – No adhesives, lubricants or antistatic agen… | – Limited surface area compared to pleated filters – Not as wide chemical compatibility or operating temperature as some alternatives | www.filsonfilters.com |
| Melt Blown Filter Cartridges | PP Spun Filter – Polypropylene | Melt Blown Filter Cartridges or PP Spun Filters are designed for higher efficiency and improved filtration. NSF-certified PP spun filter cartridges ar… | – Good dirt holding capacity – Economical and efficient | – Replacement frequency depends on impurities – Limited to specific operating conditions |
| Spun Cartridge Filter – 3R Filters (RAFEEQ FILTRATION SYSTEMS | Spun Cartridge Filter / PP melt blown cartridge filter, made of PP meltblown material, designed for high filtration efficiency. | – Wide chemical compatibility – High chlorine taste and odor reduction | – Limited to specific micron ratings – Temperature limitation of 60°C | rafeeqfilters.com |
| PP Spun Filters – mmpfilter.com | PP Spun filters manufactured by mmp are widely used as pre filter of final filter for industrial applications. They are available in a complete range… | – 100% pure polypropylene filter media – Excellent particle retention with broad chemical compatibility – Long service life and cost-effective – High… | – Limited to specific temperature and pressure ratings – May require regular maintenance and replacement | mmpfilter.com |
| Spun Bonded Filter Cartridges Manufacturer, PP Spun Filter Cartridge | Spun Bonded Filter Cartridges manufactured by Ami Enterprises, made of polypropylene construction for depth filtration. | – High dirt-holding capacity – Excellent after-sale support | – Limited to polypropylene applications – Potential for clogging with larger particles | amifilters.com |
| Spun Bonded Filter Cartridges Manufacturer & Supplier | Industrial Filters | Spun Bonded Filter Cartridges are made up of 100% polypropylene fibers, available with core and without core versions, designed for high efficiency an… | – Free of surfactants, binders, and adhesives. – Excellent flow with low pressure drop. | – Limited to polypropylene material compatibility. – Not suitable for all chemical environments. |
| Spun Polypropylene Sediment Filter Cartridges – Pure Aqua, Inc | Spun Polypropylene Sediment Filter Cartridges are constructed of multi-layers for superior depth filtration, capturing particles throughout the entire… | – Multi-layers graded density – Excellent chemical resistance – Low cost – High dirt holding capacity – Wide range of micron ratings – Wide range of s… | – Limited maximum temperature of 60°C / 140°F – Potential for reduced efficiency over time | pureaqua.com |
| Rattan Filters | Spun bonded filter cartridge | Spun Bonded / Melt- Blown Filter Cartridge made of 100% polypropylene fibers, available with core and without core version. | – 100% Polypropylene for wide chemical compatibility – High dirt holding capacity | – No media migration – Limited to specific sizes and micron ratings |
| Spun / Melt Blown Filter Cartridges Manufacturers & Suppliers – Indian … | Spun/Melt Blown Filter Cartridges are prepared of 100% polypropylene fibers with a proper gradient density from the outer to the inner surface. Availa… | – High structural integrity under harsh conditions – No media migration | – Limited maximum operating temperature: 60°C – Potential for differential pressure change out at 35psig | www.indianfilters.com |
| RO Protect Extreme – meltblown spun filter cartridges manufacturer … | RO Protect Extreme is a high-performance reverse osmosis system designed for optimal water purification. | – High efficiency in removing contaminants – Compact design for easy installation | – Requires regular maintenance – Initial setup cost may be high | www.gopani.com |
Frequently Asked Questions (FAQs)
What is a spun filter and how does it work?
A spun filter is a type of filtration device made from spun fibers that trap particles and contaminants from liquids or gases. The fibers create a dense network that captures impurities while allowing clean fluid to pass through. This process ensures efficient filtration, making spun filters ideal for various applications, including water treatment and industrial processes.
What materials are used in spun filter manufacturing?
Spun filters are typically made from synthetic materials like polypropylene or polyester, which offer durability and resistance to chemicals. These materials are chosen for their ability to withstand harsh conditions while providing effective filtration. Some manufacturers may also use biodegradable options for environmentally friendly solutions.
How do I choose the right spun filter for my needs?
To select the right spun filter, consider factors like the type of fluid being filtered, the size of particles you need to remove, and the flow rate required for your application. It’s also essential to check the filter’s compatibility with your system and any specific industry standards that may apply.
What are the benefits of using spun filters in manufacturing?
Spun filters offer several benefits, including high dirt-holding capacity, low pressure drop, and excellent filtration efficiency. They are also lightweight and easy to install, making them a popular choice in manufacturing processes. Additionally, their cost-effectiveness and long service life contribute to reduced maintenance and operational costs.
How often should spun filters be replaced?
The replacement frequency of spun filters depends on factors like usage, the type of fluid being filtered, and the level of contaminants present. Generally, it’s a good practice to monitor the pressure drop across the filter; when it exceeds the manufacturer’s recommended limit, it’s time for a replacement to maintain optimal performance.