Are you tired of sifting through countless suppliers for stainless steel tek screws? Understanding the top factories can save you time and money. By knowing the best options, you can ensure quality and reliability for your projects. Dive in to discover the leading suppliers and make informed choices today!
Teks Stainless Steel Self-Drilling Screws – Mutual Screw & Supply
Product Details: Self Drilling (Teks) Screws Stainless Steel available in various head types and sizes, including Phillips Flat Head, Modified Truss Head, and more.
Technical Parameters:
– Material: 18/8 Stainless Steel or 410 Stainless Steel
– Point Type: #2 Point, #3 Point, etc.
Application Scenarios:
– Used for fastening in construction and woodworking applications.
– Suitable for both indoor and outdoor environments.
Pros:
– Corrosion resistant due to stainless steel material.
– Variety of head types and sizes available for different applications.
Cons:
– May require specific tools for installation.
– Higher cost compared to standard screws.
Industrial Self-Drilling Screws | Wholesale TEK Screws
Product Details: Self-drilling screws, commonly referred to as TEK® screws, are fasteners with drill bit points that eliminate the need for pre-drilling. They are available in various types, materials, finishes, and sizes.
Technical Parameters:
– Materials: Steel, 18-8 stainless steel, 410 stainless steel
– Drive types: Phillips, six-lobe, square recess
Application Scenarios:
– Metal-to-metal applications
– Wood-to-metal applications
Pros:
– Eliminates the need for pre-drilling
– Wide range of types and materials available
Cons:
– May not be suitable for very hard materials
– Potential for stripping if over-torqued
Self-Drilling Tek Screws | Efficient Fastening Solution – Crouch Sales
Product Details: Self-Drilling Tek Screws are self-drilling sheet metal screws with a drill point tip that eliminates the need for pre-drilled holes. They are available in various head styles including hex head, flat head countersunk, oval head, pan head, and Phillips wafer head.
Technical Parameters:
– Available in zinc plated ZP and stainless-steel SS
– Commonly used in metal-to-metal applications
Application Scenarios:
– Metal roofing
– HVAC installations
Pros:
– Speeds up the installation process
– No need for pre-drilled holes
Cons:
– Limited to specific materials
– May not be suitable for all applications
Stainless Steel Tek Self Drilling Screws – Marsh Fasteners
Product Details: 410 Stainless Steel Tek Screws are self-drilling screws made from 410 stainless steel, primarily used in aluminum applications.
Technical Parameters:
– Material: 410 Stainless Steel
– Head Styles: Hex Washer Head, Pan Phillips Head, Flat Phillips Head
Application Scenarios:
– Used in aluminum materials
– Suitable for thinner materials
Pros:
– Hard enough to maintain a drill point
– Magnetic and can be hardened by heat treatment
Cons:
– Less resistant to corrosion compared to 300 series grades
– Not suitable for thicker materials
Industrial Self-Drilling Screws | TEK Screws in Bulk – ECS Fasteners
Product Details: Self-Drilling Screws (TEK®) are manufactured with a specialty drill bit point, eliminating the need for pre-drilled holes. They cut their own thread during installation and are suitable for metal-to-metal or metal-to-wood assemblies.
Technical Parameters:
– Lengths from 1/4″ to 6″
– Available in various types of steel or stainless steel with multiple finishes
Application Scenarios:
– Metal-to-metal assemblies
– Metal-to-wood assemblies
Pros:
– Excellent holding capabilities
– No need for pre-drilled holes
Cons:
– Not suitable for all applications
– Limited to specific materials
Stainless Steel Hex TEK Screws – Rogo Fastener Co., Inc.
Product Details: Stainless Steel Hex TEK Screws – SKU: TEK-1SS – Price: $299.95 – Package Quantity: 1
Technical Parameters:
– Dimensions: 9-1/4″L x 13-3/8″W x 2″H
– Material: Stainless Steel
Application Scenarios:
– Combining different material types
– Applications requiring frequent disassembly and reassembly
Pros:
– Variety of popular hex Tek self-tapping screws
– Easy portability between workstations
Cons:
– No reviews available
– High price point
TEK® Alternative Self Drilling Screws (SDS) – MF Supply
Product Details: TEK® Alternative Self Drilling Screws (SDS) available in various drives, head styles, sizes, and materials.
Technical Parameters:
– Stock sizes: #2 through #3/8-12
– Materials: Steel Zinc, Stainless Steel, 410 Stainless Steel, 316 Stainless Steel
Application Scenarios:
– Projects involving metal, wood, or plastic
– Applications where access might be restricted
Pros:
– No need for pre-drilled holes
– Variety in types, head styles, lengths, and thread designs
Cons:
– Specialized fasteners may not be suitable for all materials
– Potential for over-tightening in softer materials
Tek Screws – 300 Series 18-8 S/S Teks – H-O-T Drill Screws
Product Details: 300 Series 18-8 S/S Teks
Technical Parameters:
– Head & Drive: Hex Washer
– Sizes: 8-18 x 1/2, 8-18 x 1, 10-16 x 3/4, 10-16 x 1, 12-14 x 1, 12-14 x 1 1/2, 1…
Application Scenarios:
– General construction
– Metal fastening
Pros:
– Corrosion resistant
– Variety of sizes available
Cons:
– Limited to specific applications
– May require specific tools for installation
Galvanized, Stainless Steel, And Zinc Self Drilling Screws
Product Details: Self drilling screws, also known as Tek screws, are used like drill bits and other cutting tools, eliminating the need for pre-drilled holes. They form their own mating thread by creating holes as they are driven into the material.
Technical Parameters:
– Material: Carbon Steel, Stainless Steel, Galvanized, Zinc
– Sizes: Various sizes including 10-24×1″, 12-14×4″, etc.
Application Scenarios:
– Construction and building applications
– Metal and wood fastening
Pros:
– No need for pre-drilled holes
– High hardness and lead threads for effective drilling
Cons:
– Limited to specific materials
– Potential for stripping if over-torqued
Type 410 Stainless Steel Self-Drilling Hex Head Tek Screws
Product Details: Type 410 Stainless Steel Self-Drilling Hex Head Tek Screws with strong fluted drill point for penetrating steel. Hex head is flanged to prevent crushing the hole. No pre-drilling is necessary. Length is measured from underneath the flange of the head.
Technical Parameters:
– Material: Type 410 Stainless Steel
– Magnetic: Yes
Application Scenarios:
– Used in metal applications where self-drilling screws are required.
– Suitable for construction and repair projects.
Pros:
– Strong and durable material.
– No pre-drilling required, saving time.
Cons:
– Limited to specific applications.
– May not be suitable for softer materials.
Related Video
Comparison Table
| Company | Product Details | Pros | Cons | Website |
|---|---|---|---|---|
| Teks Stainless Steel Self-Drilling Screws – Mutual Screw & Supply | Self Drilling (Teks) Screws Stainless Steel available in various head types and sizes, including Phillips Flat Head, Modified Truss Head, and more. | – Corrosion resistant due to stainless steel material. – Variety of head types and sizes available for different applications. | – May require specific tools for installation. – Higher cost compared to standard screws. | www.mutualscrew.com |
| Industrial Self-Drilling Screws | Wholesale TEK Screws | Self-drilling screws, commonly referred to as TEK® screws, are fasteners with drill bit points that eliminate the need for pre-drilling. They are avai… | – Eliminates the need for pre-drilling – Wide range of types and materials available | – May not be suitable for very hard materials – Potential for stripping if over-torqued |
| Self-Drilling Tek Screws | Efficient Fastening Solution – Crouch Sales | Self-Drilling Tek Screws are self-drilling sheet metal screws with a drill point tip that eliminates the need for pre-drilled holes. They are availabl… | – Speeds up the installation process – No need for pre-drilled holes | – Limited to specific materials – May not be suitable for all applications |
| Stainless Steel Tek Self Drilling Screws – Marsh Fasteners | 410 Stainless Steel Tek Screws are self-drilling screws made from 410 stainless steel, primarily used in aluminum applications. | – Hard enough to maintain a drill point – Magnetic and can be hardened by heat treatment | – Less resistant to corrosion compared to 300 series grades – Not suitable for thicker materials | shop.marshfasteners.com |
| Industrial Self-Drilling Screws | TEK Screws in Bulk – ECS Fasteners | Self-Drilling Screws (TEK®) are manufactured with a specialty drill bit point, eliminating the need for pre-drilled holes. They cut their own thread d… | – Excellent holding capabilities – No need for pre-drilled holes | – Not suitable for all applications – Limited to specific materials |
| Stainless Steel Hex TEK Screws – Rogo Fastener Co., Inc. | Stainless Steel Hex TEK Screws – SKU: TEK-1SS – Price: $299.95 – Package Quantity: 1 | – Variety of popular hex Tek self-tapping screws – Easy portability between workstations | – No reviews available – High price point | rogofastener.com |
| TEK® Alternative Self Drilling Screws (SDS) – MF Supply | TEK® Alternative Self Drilling Screws (SDS) available in various drives, head styles, sizes, and materials. | – No need for pre-drilled holes – Variety in types, head styles, lengths, and thread designs | – Specialized fasteners may not be suitable for all materials – Potential for over-tightening in softer materials | www.mfsupply.com |
| Tek Screws – 300 Series 18-8 S/S Teks – H-O-T Drill Screws | 300 Series 18-8 S/S Teks | – Corrosion resistant – Variety of sizes available | – Limited to specific applications – May require specific tools for installation | hotdrillscrews.com |
| Galvanized, Stainless Steel, And Zinc Self Drilling Screws | Self drilling screws, also known as Tek screws, are used like drill bits and other cutting tools, eliminating the need for pre-drilled holes. They for… | – No need for pre-drilled holes – High hardness and lead threads for effective drilling | – Limited to specific materials – Potential for stripping if over-torqued | www.bacoent.com |
| Type 410 Stainless Steel Self-Drilling Hex Head Tek Screws | Type 410 Stainless Steel Self-Drilling Hex Head Tek Screws with strong fluted drill point for penetrating steel. Hex head is flanged to prevent crushi… | – Strong and durable material. – No pre-drilling required, saving time. | – Limited to specific applications. – May not be suitable for softer materials. | marineboltsupply.com |
Frequently Asked Questions (FAQs)
What are stainless steel tek screws, and why are they important?
Stainless steel tek screws are self-drilling screws designed for metal-to-metal or metal-to-wood applications. They are important because they provide strong, corrosion-resistant fastening solutions, making them ideal for outdoor and industrial use.
How do I choose the right stainless steel tek screws for my project?
To choose the right screws, consider the material you’re fastening, the thickness of the materials, and the environment. Look for screws with the appropriate thread type and length to ensure a secure fit.
What are the benefits of sourcing from a stainless steel tek screws supplier factory?
Sourcing from a supplier factory often means better pricing, consistent quality, and the ability to customize orders. You can also benefit from direct communication and faster delivery times.
Are there minimum order quantities when purchasing from a supplier factory?
Many supplier factories have minimum order quantities, which can vary based on the product and factory policies. It’s best to check with the supplier directly to understand their specific requirements.
How can I ensure the quality of stainless steel tek screws from a supplier?
To ensure quality, look for suppliers with certifications, such as ISO standards. Request samples to test before placing a large order, and read reviews or ask for references from other customers.