Are you tired of low-quality Teflon sheets that just don’t perform? Choosing the right supplier can make all the difference in your projects. By comparing the top factories, you’ll discover options that enhance durability and efficiency. Dive in to find the best suppliers for your needs!
Teflon Sheet Manufacturer and Supplier – MCP Engineering Plastics
Product Details: MCP Engineering Plastics Limited is a supplier of semi-finished, moulded, and skived Teflon™ sheets available in virgin PTFE, modified PTFE, and filled PTFE in various sizes.
Technical Parameters:
– Thickness ranges from 0.5 mm (.31″) up to 150 mm (4.00″)
– Long-term service temperature range from -200°C to 260°C, short-term maximum ser…
Application Scenarios:
– Vessel linings
– Gaskets, rings, pump interiors, dip tubes, washers, seals, spacers, and chemical…
Pros:
– Chemically inert and resistant to corrosion
– Excellent flexibility at temperatures above -70°C
Cons:
– Limited to specific temperature ranges
– Potentially higher cost compared to other materials
PTFE Sheet | Direct Plastics Limited
Product Details: PTFE Sheet (Polyetrafluorethylene)
Technical Parameters:
– Melting point: 327°C
– Shore hardness: Shore D
– Thermal conductivity: 0.20 J(g*K)
Application Scenarios:
– Used in food applications
– Used in various industrial applications
Pros:
– Chemical resistant
– High wear resistance
Cons:
– Can be difficult to bond or glue
– May have limited availability in certain sizes and colors
PTFE (Polytetrafluoroethylene) Sheets, Rods and Tubes – Plastock
Product Details: PTFE (Polytetrafluoroethylene) is a semi-crystalline fluoropolymer available in various forms including extruded virgin rod, tube, and sheet, as well as carbon and glass-filled variants. It is known for its excellent chemical resistance, non-stick properties, and wide temperature range.
Technical Parameters:
– Temperature range: -200°C to 260°C (short-term up to 300°C)
– Melting point: 327°C
– Coefficient of friction: Very low
– Chemical resistance: Excellent
– Density: 2.1-2.23 g/cm³
– Dielectric constant: 2.1-2.5
– Volume resistivity: 10¹⁶-10¹⁷ Ω·cm
– Surface resistivity: 10¹⁶-10¹⁷ Ω
– Elongation at break: 200-500%
– Tensile modulus: 690 MPa
Application Scenarios:
– Fluid handling components
– Bearings
– Valves
– Seals and gaskets
– Chemical processing applications
– Valve stem seals
– Heat exchangers
Pros:
– Excellent chemical resistance
– Very good temperature resistance
– Very low coefficient of friction
– Excellent electrical resistance
– Hydrophobic properties
– High thermal resistance
– Excellent sliding properties
Cons:
– Relatively low strength/rigidity
– High coefficient of thermal expansion
– Low dielectric constant
– Difficult to adhere to or weld
– High specific gravity compared to other plastics
PTFE Sheets, Rods and Tubes – Johnston Industrial Plastics
Product Details: PTFE (Polytetrafluoroethylene) is an inert fluoroplastic known for its chemical resistance and low friction properties. It is available in various forms including sheets, rods, tubes, and tapes.
Technical Parameters:
– Temperature range: -240°C to 260°C
– Sizes: Sheets (48″ x 48″), Rods (Diameter: 1/8″ to 4-1/2″), Tubes (Diameter: 1/4…
Application Scenarios:
– Used in machinery with rollers for low-friction applications
– Suitable for manufacturing processes where non-stick properties are advantageous
Pros:
– Outstanding chemical resistance
– Lowest static and dynamic coefficient of friction in solid materials
Cons:
– Cannot be welded successfully
– Requires special treatment for cementing
UK’s Leading Supplier of Plastic Sheets | Plastics Plus
Product Details: Plastics Plus supplies a range of premium grade plastic materials including Acrylic, Polycarbonate, PETG, APET, Polystyrene, SAN, Foam PVC, and Glass.
Technical Parameters:
– Available in various thicknesses
– Custom cutting and machining options
Application Scenarios:
– Retail displays
– Street furniture
Pros:
– High-quality materials
– Customizable sizes and shapes
Cons:
– Limited information on specific material properties
– Potentially higher cost compared to generic suppliers
Engineering Plastic Sheet – PAR Group
Product Details: Engineering & Machining Plastic Sheet
Technical Parameters:
– Temperature range: -50°C up to +250°C
– Mechanical strength: High
– Creep resistance: Excellent
– Stiffness: Excellent
– Dimensional stability: Excellent
– Impact strength: High
– Electrical insulation: Good
Application Scenarios:
– Aerospace and defence
– Food and pharmaceutical
– Packaging
– Industrial and domestic applications
– Precision parts manufacturing
– Wear components
– Impact plates
– Scrapers
– Machine guards
– Chutes
– Safety glazing
– Masking covers
Pros:
– Excellent dimensional strength
– High impact resistance
– High rigidity
– Good machinability
– FDA approved grades available
– Wide temperature range
– Excellent electrical insulation
– Good resistance to wear and chemicals
Cons:
– Some materials may be difficult to bond
– Some grades may be susceptible to stress cracking when machining
– Limited availability of certain specialty grades
Direct Plastics | Engineering Plastics | Large Stocks In All Sizes
Product Details: Direct Plastics offers a wide range of engineering plastics including sheets, rods, and clear plastics. Key materials include Acetal, Nylon, HDPE, PTFE, and PVC in various forms.
Technical Parameters:
– Available in multiple sizes and thicknesses
– High durability and resistance to wear
Application Scenarios:
– Manufacturing components for machinery
– Construction and architectural applications
Pros:
– Large stocks available for immediate delivery
– Custom cutting service available
Cons:
– Limited information on specific material properties
– Potentially higher costs for custom orders
PTFE Sheet – Gapi UK
PTFE (TEFLON) Rods, Sheets, Tubes | Virgin | Carbon Filled – Plastim
Product Details: PTFE (Teflon) Rods, Sheets, Tubes – Virgin, 25% Glass Filled & 25% Carbon Filled
Technical Parameters:
– High chemical resistance
– Low friction coefficient
Application Scenarios:
– Bearings under low charge
– Parts in petrochemical and chemical industries
Pros:
– Exceptional chemical resistance
– FDA approved for food and pharmaceutical contact
Cons:
– Poor mechanical properties
– High strain under weight
Plastic Sheet Suppliers | London | NE Plastics
Related Video
Comparison Table
| Company | Product Details | Pros | Cons | Website |
|---|---|---|---|---|
| Teflon Sheet Manufacturer and Supplier – MCP Engineering Plastics | MCP Engineering Plastics Limited is a supplier of semi-finished, moulded, and skived Teflon™ sheets available in virgin PTFE, modified PTFE, and fille… | – Chemically inert and resistant to corrosion – Excellent flexibility at temperatures above -70°C | – Limited to specific temperature ranges – Potentially higher cost compared to other materials | mcpengineering.co.uk |
| PTFE Sheet | Direct Plastics Limited | PTFE Sheet (Polyetrafluorethylene) | – Chemical resistant – High wear resistance | – Can be difficult to bond or glue – May have limited availability in certain sizes and colors |
| PTFE (Polytetrafluoroethylene) Sheets, Rods and Tubes – Plastock | PTFE (Polytetrafluoroethylene) is a semi-crystalline fluoropolymer available in various forms including extruded virgin rod, tube, and sheet, as well… | – Excellent chemical resistance – Very good temperature resistance – Very low coefficient of friction – Excellent electrical resistance – Hydrophobic… | – Relatively low strength/rigidity – High coefficient of thermal expansion – Low dielectric constant – Difficult to adhere to or weld – High specific… | www.plastock.co.uk |
| PTFE Sheets, Rods and Tubes – Johnston Industrial Plastics | PTFE (Polytetrafluoroethylene) is an inert fluoroplastic known for its chemical resistance and low friction properties. It is available in various for… | – Outstanding chemical resistance – Lowest static and dynamic coefficient of friction in solid materials | – Cannot be welded successfully – Requires special treatment for cementing | www.johnstonplastics.com |
| UK’s Leading Supplier of Plastic Sheets | Plastics Plus | Plastics Plus supplies a range of premium grade plastic materials including Acrylic, Polycarbonate, PETG, APET, Polystyrene, SAN, Foam PVC, and Glass. | – High-quality materials – Customizable sizes and shapes | – Limited information on specific material properties – Potentially higher cost compared to generic suppliers |
| Engineering Plastic Sheet – PAR Group | Engineering & Machining Plastic Sheet | – Excellent dimensional strength – High impact resistance – High rigidity – Good machinability – FDA approved grades available – Wide temperature rang… | – Some materials may be difficult to bond – Some grades may be susceptible to stress cracking when machining – Limited availability of certain special… | www.par-group.co.uk |
| Direct Plastics | Engineering Plastics | Large Stocks In All Sizes | Direct Plastics offers a wide range of engineering plastics including sheets, rods, and clear plastics. Key materials include Acetal, Nylon, HDPE, PTF… | – Large stocks available for immediate delivery – Custom cutting service available |
| PTFE Sheet – Gapi UK | www.gapi.co.uk | |||
| PTFE (TEFLON) Rods, Sheets, Tubes | Virgin | Carbon Filled – Plastim | PTFE (Teflon) Rods, Sheets, Tubes – Virgin, 25% Glass Filled & 25% Carbon Filled | – Exceptional chemical resistance – FDA approved for food and pharmaceutical contact |
| Plastic Sheet Suppliers | London | NE Plastics |
Frequently Asked Questions (FAQs)
What types of Teflon sheets do suppliers typically offer?
Most suppliers offer a variety of Teflon sheets, including standard, reinforced, and specialty grades. You can find options that vary in thickness, size, and temperature resistance, catering to different applications such as non-stick surfaces, insulation, and chemical resistance.
How can I choose the right Teflon sheet for my needs?
To choose the right Teflon sheet, consider factors like the operating temperature, chemical exposure, and the specific application you have in mind. It’s also helpful to consult with suppliers who can provide guidance based on your requirements.
Are Teflon sheets customizable?
Yes, many suppliers offer customization options for Teflon sheets. You can request specific sizes, thicknesses, and even custom shapes to better fit your project needs. Just reach out to the supplier to discuss your specifications.
What is the typical lead time for ordering Teflon sheets?
Lead times can vary depending on the supplier and the complexity of your order. Generally, you can expect a turnaround of a few days to a couple of weeks. It’s best to check with the supplier for precise timelines.
Do Teflon sheet suppliers provide samples?
Yes, many Teflon sheet suppliers offer samples upon request. This allows you to test the material before making a larger purchase. Be sure to ask about sample availability when you contact them.