Are you in the market for wafer valves and feeling overwhelmed by choices? Comparing the top suppliers is crucial to ensure quality and reliability. Discovering the best options can save you time and money. Dive in to find out which factories stand out and make your decision easier!
Wafer Valves Suppliers – Thomasnet
Product Details: Wafer valves including butterfly and check valves made from various materials such as PVC, stainless steel, and carbon steel.
Technical Parameters:
– Sizes range from 1 1/2 in. to 48 in.
– Operating pressure up to 285 psi.
Application Scenarios:
– Water and wastewater treatment
– Chemical processing
Pros:
– Corrosion-resistant options available
– Suitable for various industrial applications
Cons:
– Limited size options for some models
– Potentially higher cost for specialized materials
Butterfly Valves Manufacturer – Wafer Type Butterfly Valve …
Product Details: Butterfly Valves are used for the flow regulation in pipes with large diameters. They operate similarly to a ball valve, requiring just one-quarter turn of the handle from fail open to fail close.
Technical Parameters:
– Wafer Type
– Actuated Butterfly Valves
Application Scenarios:
– Water & Wastewater Treatment
– Power Generation
Pros:
– Good Seal at Low Pressure
– Require Less Structural Assistance
Cons:
– Some pressure drop is always induced in the flow
– Limited to specific applications
Wafer Double Disc, Wafer Silent & Globe Silent Check Valves – Keckley
Product Details: Keckley check valves are designed for liquid or gas applications where protection from flow reversal in a pipeline is required. They include Thin Type Single Plate Wafer Check, Wafer Body Double Disc, Retainerless Wafer Lug Body Double Disc, Retainerless Wafer Double Flange Body Double Disc, Wafer Silent Check Valves, and Globe Silent Check Valves.
Technical Parameters:
– Cracking pressure: designed to open with a relatively low cracking pressure.
– Installation: primarily installed in horizontal lines or in vertical (upward flo…
Application Scenarios:
– Chemical processing
– Pharmaceuticals
– Oil & gas
– Power generation
– Pulp & paper
– Marine
– Water applications
Pros:
– Outperform and outlast conventional swing check valves when installed properly.
– Inexpensive way to protect pipelines against flow reversal.
Cons:
– May require optional springs to adjust cracking pressure.
– Performance can vary based on installation and application conditions.
Showing results for 4 inch wafer valve – MSC Industrial Supply
Product Details: 4 inch wafer valve
Technical Parameters:
– Material: Stainless Steel
– Pressure Rating: 150 PSI
Application Scenarios:
– Water Treatment
– Chemical Processing
Pros:
– Durable construction
– Compact design
Cons:
– Limited size options
– Potential for leakage if not installed correctly
Wafer Ball Valves
Product Details: Wafer Ball Valves – Full bore 2 or 3 way wafer pattern ball valves suitable for various applications offering durability and reliability.
Technical Parameters:
– Size: 15mm (1/2”) to 200mm (8”)
– Pressure Rating: PN16, ANSI 150
Application Scenarios:
– Confined spaces where flanged ball valves cannot be used
– Bottom of tanks or areas with limited space
Pros:
– Durable and reliable design
– Available with pneumatic or electric actuators and additional accessories
Cons:
– Limited to specific applications due to size and design
– May require specific installation conditions
V11 WAFER BUTTERFLY VALVE | Fivalco – Leading Valves Manufacturer
Product Details: V11 Wafer Butterfly Valve, Fig No.: V1116 (PN16)
Technical Parameters:
– Size: DN40 … DN1200
– Working Pressure: 16bar
Application Scenarios:
– Fire Protection
– Mechanical Service & HVAC
Pros:
– Higher strength for disc with pinned single shaft ensures optimal alignment.
– Excellent flow characteristic with flow in either direction.
Cons:
– Limited to specific working temperatures based on seat material.
– Installation may require specific alignment for optimal performance.
DUO-CHEK® High Performance Non-Slam Check Valves
Product Details: Duo-Chek® High Performance Non-Slam Dual Plate Check Valves are the original mission wafer check valves introduced to the market in the late 50’s.
Technical Parameters:
– Body Materials: Cast Iron, Carbon Steel, Stainless Steels, Duplex Stainless Stee…
– Size Range: 2″ to 88″
Application Scenarios:
– Petroleum Refining
– Oil and Gas Production
Pros:
– Dual-plate designs that are compact and lightweight for efficient seating, opera…
– Independent springs with long legs to prevent seat scrubbing and provide non-sla…
Cons:
– Limited information on specific drawbacks
– Generic placeholder for cons
Wafer Butterfly Valve – Indusrtrial Valve Manufacturer
Product Details: Wafer Butterfly Valve
Technical Parameters:
– Size: 2″ to 48″
– Pressure Rating: ANSI Class 150 to 300
Application Scenarios:
– Water Supply Systems
– Wastewater Treatment
Pros:
– Lightweight and compact design
– Easy installation and maintenance
Cons:
– Limited to low-pressure applications
– Potential for leakage if not properly maintained
Wafer Type Butterfly Valve Manufacturer, Stockist, Supplier, Exporter …
Product Details: Wafer Type Butterfly Valve Manufacturer, Stockist, Supplier, Exporter, Importer. Rubber Lined, Elastomer Rubber Seat, Resilient, Concentric, Center Disc, Flangeless, Sandwich Body, Slim Seal Design.
Technical Parameters:
– Design Standard – BS 5155 / API 609 / AWWA C 504
– Pressure Rating – PN10 / PN16 / 150#
Application Scenarios:
– Water Treatment Plant
– Chemical Industry
Pros:
– Maintenance Free Version
– Zero Leakage
Cons:
– Limited Size Range
– Potential for Corrosion in Certain Environments
Wafer valve – All industrial manufacturers – DirectIndustry
Related Video
Comparison Table
| Company | Product Details | Pros | Cons | Website |
|---|---|---|---|---|
| Wafer Valves Suppliers – Thomasnet | Wafer valves including butterfly and check valves made from various materials such as PVC, stainless steel, and carbon steel. | – Corrosion-resistant options available – Suitable for various industrial applications | – Limited size options for some models – Potentially higher cost for specialized materials | www.thomasnet.com |
| Butterfly Valves Manufacturer – Wafer Type Butterfly Valve … | Butterfly Valves are used for the flow regulation in pipes with large diameters. They operate similarly to a ball valve, requiring just one-quarter tu… | – Good Seal at Low Pressure – Require Less Structural Assistance | – Some pressure drop is always induced in the flow – Limited to specific applications | www.usvalve.com |
| Wafer Double Disc, Wafer Silent & Globe Silent Check Valves – Keckley | Keckley check valves are designed for liquid or gas applications where protection from flow reversal in a pipeline is required. They include Thin Type… | – Outperform and outlast conventional swing check valves when installed properly. – Inexpensive way to protect pipelines against flow reversal. | – May require optional springs to adjust cracking pressure. – Performance can vary based on installation and application conditions. | www.keckley.com |
| Showing results for 4 inch wafer valve – MSC Industrial Supply | 4 inch wafer valve | – Durable construction – Compact design | – Limited size options – Potential for leakage if not installed correctly | www.mscdirect.com |
| Wafer Ball Valves | Wafer Ball Valves – Full bore 2 or 3 way wafer pattern ball valves suitable for various applications offering durability and reliability. | – Durable and reliable design – Available with pneumatic or electric actuators and additional accessories | – Limited to specific applications due to size and design – May require specific installation conditions | omegavalves.com |
| V11 WAFER BUTTERFLY VALVE | Fivalco – Leading Valves Manufacturer | V11 Wafer Butterfly Valve, Fig No.: V1116 (PN16) | – Higher strength for disc with pinned single shaft ensures optimal alignment. – Excellent flow characteristic with flow in either direction. | – Limited to specific working temperatures based on seat material. – Installation may require specific alignment for optimal performance. |
| DUO-CHEK® High Performance Non-Slam Check Valves | Duo-Chek® High Performance Non-Slam Dual Plate Check Valves are the original mission wafer check valves introduced to the market in the late 50’s. | – Dual-plate designs that are compact and lightweight for efficient seating, opera… – Independent springs with long legs to prevent seat scrubbing a… | – Limited information on specific drawbacks – Generic placeholder for cons | cranecpe.com |
| Wafer Butterfly Valve – Indusrtrial Valve Manufacturer | Wafer Butterfly Valve | – Lightweight and compact design – Easy installation and maintenance | – Limited to low-pressure applications – Potential for leakage if not properly maintained | ntgdvalve.com |
| Wafer Type Butterfly Valve Manufacturer, Stockist, Supplier, Exporter … | Wafer Type Butterfly Valve Manufacturer, Stockist, Supplier, Exporter, Importer. Rubber Lined, Elastomer Rubber Seat, Resilient, Concentric, Center Di… | – Maintenance Free Version – Zero Leakage | – Limited Size Range – Potential for Corrosion in Certain Environments | www.nivzvalves.com |
| Wafer valve – All industrial manufacturers – DirectIndustry | www.directindustry.com |
Frequently Asked Questions (FAQs)
What is a wafer valve, and how does it work?
A wafer valve is a type of valve designed to be installed between two flanges in a piping system. It operates by using a disc that pivots to control the flow of fluid. When the valve is open, the disc is parallel to the flow, allowing fluid to pass through. When closed, the disc blocks the flow, preventing any passage.
What are the advantages of using wafer valves?
Wafer valves are compact, lightweight, and easy to install, making them ideal for tight spaces. They offer excellent sealing capabilities and are cost-effective compared to other valve types. Their design minimizes pressure drop, enhancing system efficiency.
How do I choose the right wafer valve supplier?
When selecting a wafer valve supplier, consider their reputation, product quality, and range of offerings. Look for suppliers with industry certifications and positive customer reviews. It’s also helpful to assess their customer service and support, ensuring they can assist you with any inquiries or issues.
What materials are commonly used in wafer valves?
Wafer valves are typically made from materials like stainless steel, cast iron, and PVC, depending on the application and fluid type. Stainless steel is popular for its corrosion resistance, while PVC is often used for chemical applications. Always choose a material that suits your specific needs.
How can I ensure the longevity of my wafer valves?
To extend the lifespan of your wafer valves, perform regular maintenance checks, including cleaning and lubrication. Ensure they are installed correctly and operated within their specified pressure and temperature limits. Address any leaks or issues promptly to prevent further damage.